Asante-technologies 480 User Manual download pdf (Page 20)

Chapter 3: Initial Software Setup

Configure the switch by connecting directly to it through a console (out-of-band management), running a terminal

emulation program, such as HyperTerminal or by using telnet.

3.1 Connecting to a Console

To connect the switch to a console or computer, set up the system in the following manner:

7. Plug power cord into the back of the switch.

8. Attach a straight-through serial cable between the RS232 console port and a COM port on the PC.

9. Set up a HyperTerminal (or equivalent terminal program) in the following manner:

a. Open the HyperTerminal program, and from its file menu, right-click on Properties.

b. Under the Connect To tab, choose the appropriate COM port (such as COM1 or COM2).

c. Under the Settings tab, choose Select Terminal keys for Function, Arrow, and Ctrl keys. Be sure the setting

is for Terminal keys, NOT Windows keys

d. Choose VT100 for Emulation mode.

20 Asante IntraCore IC39240/480 User’s Manual

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 147 148

No comments

Asante-technologies 480 User Manual Page 20